Introduction

Welcome to the Vapepie Electronic Cigarette Beginner Guide! Unlike traditional cigarettes, electronic cigarettes can sometimes present unique challenges during use. This guide provides solutions to common problems, along with usage precautions, to ensure you enjoy a seamless experience with your Vapepie device.

Common Problems and Solutions

No Vapor Production

If your Vapepie device isn’t producing vapor, try these troubleshooting steps:

Solution 1: Check Battery Level

• Battery >30%: Breathing light stays on for 3 seconds (medium battery).
• Battery <30%: Breathing light flashes 3 times (low battery).
• Battery <5%: Breathing light flashes 10 times (charge immediately).

Solution 2: Inspect Contact Pin

• Check if the contact pin at the connection between the vape pen and pod is popped up. Adjust it if needed.

Solution 3: Rotate and Reinstall Pod

• Rotate the pod 180° and reinstall it to ensure proper alignment.

Solution 4: Clear Air Intake Holes

• Check if the air intake holes on both sides are blocked. Use a sharp object to remove any debris.

Solution 5: Check Pod Bottom Hole

• Inspect the small hole at the bottom center of the pod. If blocked, clean it with a non-metal object to avoid short-circuiting your Vapepie vape pen.

Solution 6: Contact Support

• If none of the above works, reach out to Vapepie’s after-sales customer service for help.

Condensation Issues

Condensation is often mistaken for leaking oil. It’s a liquid caused by temperature differences, appearing light yellow to white with a slight spicy taste. Here’s how to handle it:

Solution 1: Mouthpiece Condensation

Hold the mouthpiece downward and shake vigorously 10+ times to remove condensation. Clean the inside with a tissue or cotton swab.

Solution 2: Surface Condensation

Wipe the vape pen and pod surfaces with a tissue to remove condensation caused by temperature changes.

Solution 3: Bottom Condensation

Check the pod’s bottom hole from the side. Small water droplets or minimal oil are normal. If there’s a large amount of oil or it can be shaken out, it’s a pod malfunction—contact Vapepie after-sales service at vapespie.com.

Incorrect Operations to Avoid

Avoid these mistakes to protect your Vapepie device:

Error 1: Using Upside Down

Sucking on the vape pen upside down can burn out the atomizer core, making it unusable.

Error 2: Blocking Air Holes

Covering the small holes on both sides while inhaling increases resistance, affecting performance.

Error 3: Cleaning with Metal

Using metal to wipe the vape pen’s interior can cause a short circuit.

Error 4: Washing with Water

Water exposure can short-circuit your Vapepie device. Avoid it entirely.

Maintenance Tips

• To extend the lifespan of your Vapepie electronic cigarette:
• Frequently clean the pod and vape pen interior.
• Use opened pods as soon as possible to avoid degradation.

Contact Information

For additional support or to address persistent issues, visit vapespie.com or contact Vapepie customer service.